Doodle Weaving – ARTBAR

If I experienced to decide on 1 art medium for the relaxation of my lifetime it would be fibers. I am always drawn to them, even from an early age when I only preferred to don corduroy trousers simply because I could operate my fingers across the grooves and make a interesting audio. My target as an art significant in school was textile layout, and in my creative career in excess of the previous 30 years I have commenced a children’t clothes corporation, a quilting enterprise, and there is not just one wall in this home that doesn’t have 1 of my do-it-yourself material banners (wait around until you see my upcoming submit!). I am stating all this to explain to you that I ultimately tried doodle weaving and I want to do practically nothing else all working day each individual working day!!

doodle waving, lots of bright colored yarns, DIY for tweens and teens

The best section is that there are really no issues to be made… just experimentation and coloration exploration. And you barely require any provides, and there is no mess, and you can acquire them on a trip, and little ones as younger as four can make them much too. So quite a few reasons to makes 1! Do you want to give it a consider? Alright, superior. Permit me demonstrate you how it is accomplished.

Materials Essential for Doodle Weavings:

~ Piece of cardboard for the loom (mine is 10.5″ X 6.5″)

~ Scissors

~ X-acto knife

~ Yarn in numerous weights and colors

~ Plastic lacing needle or masking tape

~ Stick

~ Fork (for pushing down the weft so it matches snuggly with each other without gaps)

Make a cardboard loom for weaving with kids

How to Make a Doodle Weaving:

1. Very first, make the cardboard loom.

Move 1: Cut a rectangular piece of cardboard, I happened to now have a piece that was 6.5 inches large and I slice the size to 10.5 inches.

Move 2: Fold the ends up about 3/4 of an inch. You’ll need to “score” the back again with an X-acto knife and then bend it up. This signifies you slice a shallow line at the level the place you want to bend it on the reverse aspect to enable bend in a straight line.

Stage 3: Reduce an even amount of slits with scissors on possibly finish for the warp (which is the stationery yarns that go up and down). I designed 16 slits mainly because I desired my warp to be restricted. But if you are using a great deal of heavy, thick yarn or performing this with modest kids then possibly you want to do 12 slits. You can see these rainbow weavings that we did in art camp for a loom with 12 warp threads.

Make a cardboard loom for weaving with kids, attaching the warp

2. Attach the warp.

Step 1: Lower a single warp yarn for just about every two slits. I minimize 8 pretty extensive pieces. Every single yarn should really loop all over the major and cling down at the bottom to make the fringe.

Phase 2: Double-knot the leading about the adhere, earlier mentioned the loom, then press the yarn into the slits.

Action 3: Press the other conclusion of the yarn into the base slits and then pull so the pressure is not far too unfastened and not to tight, but making certain stress is equal with all warp threads.

Move 4: Tie knots at the base to create the fringe. Do not trim the fringe still, wait to do that at the finish.

Making a cardboard loom to weave with kids

3. Commence your weaving.

Phase 1: Decide on your weft colors (the yarns that go across) and choose a person coloration to start off. If you have a needle, good. If not (I couldn’t discover mine) you can tape the close of the yarn like a shoelace which assists weave through the warp.

Stage 2: Beginning at the base, weave a handful of rows just straight throughout. If you’ve in no way carried out weaving just before, consider a glimpse my weaving with young ones put up which points out in element how to weave. It is in essence just around and under, then back again across in the opposite over-under pattern. It’s not challenging, but it can be simple to fall a warp thread or fail to remember to adjust sample on the way back. So right after each individual operate by means of, use your fork to push down the weft and eyeball that items seem good. And bear in mind to be careful not to pull the yarn much too tightly on possibly facet. This will distort the weaving. Young children do this most of the time, but you can instruct them to check out out for that.

Doodle weaving on a cardboard loom with colorful yarns

Step 3: Just after you have a handful of rows on the base, you can begin “doodling” with distinct yarns. Commence any where and just develop a shape. I was loosely thinking of mountains when I built this which served in my doodling.

Doodle weaving on a cardboard loom with colorful yarns

Phase 4: When you’re ready for the following shade, just commence future to the previous colour, even if you are starting in the middle. To steer clear of gaps in the weaving, make certain that the following color is woven about some of the very same warp yarns that the very last color utilized. But if you do uncover that there are gaps at the close, you can also just go back and fill them. This is doodling, so nearly anything goes!

Doodle weaving on a cardboard loom with colorful yarns

Stage 5: Check out some other kinds of weaves. I don’t know what this is named (listed here is a glossary of distinct weaves if you are interested) but I just designed it up and it looked awesome and appealing. I like mixing puffy, thick yarn with thinner yarns. For me, the shade is as crucial as the texture.

Doodle weaving on a cardboard loom with colorful yarns

Doodle weaving on a cardboard loom with colorful yarns

Doodle weaving with a cardboard loom and colorful yarns

Bear in mind, every time you start or finish a new colour, go away a tail. You can even leave the tape on the stop since you can use it later on to finish the back.

A finished doodle weaving on a stick, the ends still need to be tucked in

Step 6. When you get to the prime, weave a several straight rows to complete. Cautiously pop the warp yarns off of the loom. You will find that there is a minor added house at the top and base. You can possibly press the weft yarns all over a bit to fill the area, or weave a couple much more rows to fill the place.

Tucking the ends into the back of a colorful doodle weaving, made with a cardboard loom

Phase 7: Now it is time to end the back again. 1st, make sure all the tails are looped by the ultimate warp yarns at the ends. Then, flip your weaving over and just start out weaving the tails back by means of some of the warp or weft threads. You can either use the taped conclude, or use a dull pencil to pull up a loop marginally, then tuck the tail under.

Tucking the ends into the back of a colorful doodle weaving, made with a cardboard loom

The back of a colorful doodle weaving with the ends tucked into the warp and weft

When all the tails are tucked in (you may possibly have to use masking tape occasionally if there is nowhere to tuck anything), snip them to about an inch or so.

Finished doodle weaving on a stick

Step 8: Trim the base, add a wire hanger, and you are performed! I hope you love your weaving and are quite very pleased of it. I really like mine so considerably and can not wait around to make extra!

xo, Bar

– – – – – – – – – – – – – – – – – – – –

Did you like this submit? Listed here are some additional resourceful strategies applying fibers!

Weaving with kids using a cardboard loom.

Weaving with Young ones

Rainbow Weaving with Koolaid Dyed Yarn

Rainbow Weaving with Koolaid Dyed Yarn

Making God's Eyes with Sticks

Producing God’s Eyes with Sticks

Leave a Reply

Next Post

Review: Parblo Intangbo M pen tablet

Review unit provided by Parblo Parblo’s a company that sells pen tablets and pen displays for creating digital art. The pen display lineup the company is popular for is the Parblo Coast series. For pen tablets, they currently have these series: Intangbo (higher end): From US $55 Ninos (mid range): […]

You May Like